Description:

For prime coating of the foundations before installation of torch-on, self-adhesive roofing and waterproofing materials.

  • TECHNONICOL № 01 bitumen primer is a solution of high-quality oil bitumens with a softening temperature of no lower than 80 °С in specially selected organic solvents. It has an enhanced dampening ability, penetrability and short drying time. Ready primer is applied to the foundation at once, which provides additional convenience and enhanced performance for carrying out work.
  • TECHNONICOL № 03 polymer-bitumen primer consists of a solution of oil bitumen, polymers and adhesive additives in organic solvents. The material has a short drying time and provides reliably protection of the metal surface against corrosion before installation of the waterproofing layer. After installation of the waterproofing materials, it's increases the adhesive strength of the material to the base .
  • TECHNONICOL № 04 bitumen emulsion primer is produced on the basis of bitumen dispersion in water. The material does not contain solvents, it has a neutral smell and is ideally suited for work in residential premises.

Areas of application:

  • TECHNONICOL № 01: Preparation (prime coating) of the foundations before installation of welded-on, self-adhesive roofing and waterproofing materials.
  • TECHNONICOL № 03: is used for prime coating of the bridge construction surfaces before installation of waterproofing materials, prime-coating of sandy-cement, concrete and other surfaces before installation of torch-on or self-adhesive roofing and waterproofing materials.
  • TECHNONICOL № 04: Preparation (prime coating) of the foundations before installation of welded-on, self-adhesive roofing and waterproofing materials. Installation of waterproofing inside the premises.

Application:

  • TECHNONICOL № 01 is applied to a processed surface using large or small paint brushes. During application the primer is brushed into the surface, and it saturates and attaches itself to it, ensuring a strong adhesion of the waterproofing covering to the foundation. If used when concentrated, the primer must be thinned with a solvent (paraffin, petrol, white spirit) in a proportion range of between 1 to 1.5 and 1 to 2.
  • TECHNONICOL № 03 is applied to surface by brush, roller or by using airless sputtering. Primer surface coverage is 0.25 to 0.35 l/m2 (1 l of primer per 3.33 mof surface area).
  • TECHNONICOL № 04 is also to be applied on a processed surface using large or small paint brushes. Application temperature range is +5 °С to +40 °С. Primer surface coverage is 0.25 to 0.35 l/m2 (1 l of primer per 3.33 m2 of surface area).
Выборг, Северо-Запад РоссииВыборг, Северо-Запад России

TECHNONICOL BITUMEN PRIMER №03

Technical Data Sheet (en) Add to archiveRemove from the archive
Выборг, Северо-Запад РоссииВыборг, Северо-Запад России

TECHNONICOL BITUMEN PRIMER №04

Technical Data Sheet (en) Add to archiveRemove from the archive
Выборг, Северо-Запад РоссииВыборг, Северо-Запад России

TECHNONICOL Nr. 01

Technical Data Sheet (en) Add to archiveRemove from the archive